diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c
index 5952d15..26ee39e 100644
--- a/board/Marvell/sheevaplug/sheevaplug.c
+++ b/board/Marvell/sheevaplug/sheevaplug.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright (C) 2021  Tony Dinh <mibodhi@gmail.com>
+ * Copyright (C) 2021-2022  Tony Dinh <mibodhi@gmail.com>
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
@@ -8,17 +8,21 @@
 
 #include <common.h>
 #include <init.h>
-#include <miiphy.h>
-#include <net.h>
+#include <netdev.h>
 #include <asm/global_data.h>
 #include <asm/mach-types.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 #include <asm/arch/mpp.h>
-#include "sheevaplug.h"
+#include <linux/bitops.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define SHEEVAPLUG_OE_LOW		(~(0))
+#define SHEEVAPLUG_OE_HIGH		(~(0))
+#define SHEEVAPLUG_OE_VAL_LOW		BIT(29)       /* USB_PWEN low */
+#define SHEEVAPLUG_OE_VAL_HIGH		BIT(17)       /* LED pin high */
+
 int board_early_init_f(void)
 {
 	/*
@@ -88,6 +92,11 @@
 	return 0;
 }
 
+int board_eth_init(struct bd_info *bis)
+{
+	return cpu_eth_init(bis);
+}
+
 int board_init(void)
 {
 	/*
@@ -95,72 +104,8 @@
 	 */
 	gd->bd->bi_arch_number = MACH_TYPE_SHEEVAPLUG;
 
-	/* adress of boot parameters */
+	/* address of boot parameters */
 	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
 
 	return 0;
 }
-
-static int fdt_get_phy_addr(const char *path)
-{
-	const void *fdt = gd->fdt_blob;
-	const u32 *reg;
-	const u32 *val;
-	int node, phandle, addr;
-
-	/* Find the node by its full path */
-	node = fdt_path_offset(fdt, path);
-	if (node >= 0) {
-		/* Look up phy-handle */
-		val = fdt_getprop(fdt, node, "phy-handle", NULL);
-		if (val) {
-			phandle = fdt32_to_cpu(*val);
-			if (!phandle)
-				return -1;
-			/* Follow it to its node */
-			node = fdt_node_offset_by_phandle(fdt, phandle);
-			if (node) {
-				/* Look up reg */
-				reg = fdt_getprop(fdt, node, "reg", NULL);
-				if (reg) {
-					addr = fdt32_to_cpu(*reg);
-					return addr;
-				}
-			}
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
-{
-	u16 reg;
-	int phyaddr;
-	char *name = "ethernet-controller@72000";
-	char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0";
-
-	if (miiphy_set_current_dev(name))
-		return;
-
-	phyaddr = fdt_get_phy_addr(eth0_path);
-	if (phyaddr < 0)
-		return;
-
-	/*
-	 * Enable RGMII delay on Tx and Rx for CPU port
-	 * Ref: sec 4.7.2 of chip datasheet
-	 */
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
-	miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, &reg);
-	reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
-	miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
-	miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
-
-	/* reset the phy */
-	miiphy_reset(name, phyaddr);
-
-	printf("88E1116 Initialized on %s\n", name);
-}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/Marvell/sheevaplug/sheevaplug.h b/board/Marvell/sheevaplug/sheevaplug.h
deleted file mode 100644
index e026c1b..0000000
--- a/board/Marvell/sheevaplug/sheevaplug.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#ifndef __SHEEVAPLUG_H
-#define __SHEEVAPLUG_H
-
-#define SHEEVAPLUG_OE_LOW		(~(0))
-#define SHEEVAPLUG_OE_HIGH		(~(0))
-#define SHEEVAPLUG_OE_VAL_LOW		(1 << 29)	/* USB_PWEN low */
-#define SHEEVAPLUG_OE_VAL_HIGH		(1 << 17)	/* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG		10
-#define MV88E1116_CPRSP_CR3_REG		21
-#define MV88E1116_MAC_CTRL_REG		21
-#define MV88E1116_PGADR_REG		22
-#define MV88E1116_RGMII_TXTM_CTRL	(1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL	(1 << 5)
-
-#endif /* __SHEEVAPLUG_H */